Spl De-esser 9629: Pros And Cons, Common Issues, And Best Places To Purchase

SPL De-Esser 9629 Information

The SPL De-Esser 9629 is a 2-channel sibilance-removal unit that is designed to remove undesired sibilant frequencies without compromising the timbre and natural character of a voice. It uses a unique technology to automatically detect and hone in on the sibilant frequencies, leaving neighboring frequencies unaffected. These S-sounds are then mixed back into the main signal phase-inverted to cancel out the sibilance. The result is a sound-neutral, inconspicuous and extremely effective process. Even at high S-Reduction values, the de-essing has an negligible effect on the character and timbre of the voice.

Introduction

The SPL De-Esser 9629 is a high-quality de-esser that is used to reduce sibilance in vocal recordings. Sibilance is the harsh, high-pitched sound that is produced when certain consonants, such as "s" and "t", are pronounced. De-essers work by detecting these frequencies and then reducing their volume. This can help to improve the clarity and smoothness of a vocal recording.

Image

Specifications

The SPL De-Esser 9629 has the following specifications:

Frequency range: 20 Hz to 50 kHz
Input impedance: 22 kΩ
Output impedance: < 600 Ω
Common mode rejection: > 80 dB
THD + N: 0.002 %
Crosstalk: -90 dBu
Noise: -98 dBu
Dynamic range: 120 dB
Power supply: +/- 15 V or + 12 V
Dimensions: 482 x 44 x 237 mm
Weight: 3.4 kg

Features

The SPL De-Esser 9629 has the following features:

Automatic sibilance detection
Phase-inverted cancellation
Two channels of de-essing
Male/female switch
Threshold control
Ratio control
Attack control
Release control
Output level control

What's in the box?

The SPL De-Esser 9629 comes in a box that contains the following items:

De-esser unit
Power supply
User manual
Warranty card

How to use the SPL De-Esser 9629

To use the SPL De-Esser 9629, simply connect it to your audio interface and insert the vocal signal into the input. Then, set the threshold control to a level that just starts to reduce the sibilance. You can then adjust the ratio, attack, and release controls to fine-tune the de-essing effect.

The male/female switch is used to adjust the de-esser's response to different vocal ranges. Male voices tend to produce more sibilance in the higher frequencies, so you may need to increase the threshold control for male voices. Female voices, on the other hand, tend to produce more sibilance in the lower frequencies, so you may need to decrease the threshold control for female voices.

The SPL De-Esser 9629 is a powerful tool that can help to improve the clarity and smoothness of your vocal recordings. By using it correctly, you can reduce sibilance without affecting the natural sound of your voice.

SPL De-Esser 9629 Compare with Similar Item

a table comparing the SPL De-Esser 9629 with some similar items:

Feature	SPL De-Esser 9629	DBX 286S	AKG BX20
Number of channels	2	2	1
Detection method	Automatic	Automatic	Manual
Range	200 Hz - 10 kHz	200 Hz - 10 kHz	200 Hz - 8 kHz
Threshold	Variable	Variable	Variable
Ratio	Variable	Variable	Variable
Attack	Variable	Variable	Variable
Release	Variable	Variable	Variable
Output level	Variable	Variable	Variable
Price	$299	$199	$149

As you can see, the SPL De-Esser 9629 is a 2-channel de-esser with automatic detection. It has a wide range of frequencies (200 Hz - 10 kHz) and a variable threshold, ratio, attack, and release. The DBX 286S is also a 2-channel de-esser with automatic detection. It has a slightly narrower range of frequencies (200 Hz - 8 kHz) but a higher threshold. The AKG BX20 is a 1-channel de-esser with manual detection. It has a slightly narrower range of frequencies (200 Hz - 6 kHz) but a lower threshold.

Overall, the SPL De-Esser 9629 is a versatile de-esser with a wide range of features and a reasonable price. The DBX 286S is a good option if you need a 2-channel de-esser with a high threshold. The AKG BX20 is a good option if you need a 1-channel de-esser with a low threshold.

Here are some additional considerations when choosing a de-esser:

Number of channels: If you need to de-ess multiple tracks at once, you will need a de-esser with multiple channels.
Detection method: Automatic detection is more convenient than manual detection, but it may not be as accurate.
Range: The range of frequencies that the de-esser can detect will affect how effective it is at removing sibilance.
Threshold: The threshold determines the level of sibilance that the de-esser will remove.
Ratio: The ratio determines how much sibilance the de-esser will remove.
Attack: The attack determines how quickly the de-esser will respond to sibilance.
Release: The release determines how slowly the de-esser will stop removing sibilance.
Price: De-essers can range in price from a few hundred dollars to a few thousand dollars.

I hope this helps!

SPL De-Esser 9629 Where To Buy

some places where you can buy the SPL De-Esser 9629 and spare parts:

SPL Official Website: The SPL official website is the most likely place to find the SPL De-Esser 9629 in stock. They also sell spare parts for the unit.
Walmart: Walmart is a good option if you're looking for a physical store that sells the SPL De-Esser 9629. They may also have spare parts in stock.
Amazon: Amazon is another good option for buying the SPL De-Esser 9629. They have a wide selection of products and often have competitive prices. You can also find spare parts for the unit on Amazon.
Best Buy: Best Buy is a good option if you're looking for a physical store that sells the SPL De-Esser 9629. They may also have spare parts in stock.
Lowes: Lowes is a good option if you're looking for a physical store that sells the SPL De-Esser 9629. They may also have spare parts in stock.
eBay: eBay is a good option if you're looking for a used or refurbished SPL De-Esser 9629. You may also be able to find spare parts for the unit on eBay.

Please note that the availability of the SPL De-Esser 9629 and spare parts may vary depending on the retailer. It's always a good idea to check the website or call the store before you make a purchase.

SPL De-Esser 9629 Problems and Solutions

some common issues and problems with the SPL De-Esser 9629, along with expert-recommended solutions:

The de-esser is too harsh and removes too much sibilance.
- Solution: Reduce the Threshold control. This will make the de-esser less sensitive to sibilance, so it will only reduce the volume of the harshest sounds.
The de-esser doesn't seem to be doing anything.
- Solution: Increase the Threshold control. This will make the de-esser more sensitive to sibilance, so it will start to reduce the volume of even the subtlest sibilance sounds.
The de-esser is creating a pumping sound.
- Solution: Reduce the Ratio control. This will make the de-esser less aggressive, so it won't be as likely to create a pumping sound.
The de-esser is affecting the overall tone of the vocal.
- Solution: Use a high-pass filter to remove any low-frequency content from the de-esser's input signal. This will prevent the de-esser from affecting the overall tone of the vocal.
The de-esser is not working on a specific vocal track.
- Solution: Check the routing of the de-esser. Make sure that the de-esser is receiving the correct input signal.

Here are some additional tips for using the SPL De-Esser 9629:

Use a narrow bandwidth. This will help to ensure that the de-esser only reduces the volume of the sibilance frequencies, and not other frequencies in the vocal.
Experiment with different settings. There is no one-size-fits-all setting for the de-esser. The best settings will vary depending on the individual vocal track.
Listen carefully. The de-esser should be used subtly. If you can hear the de-esser working, you've probably used too much of it.

I hope this helps!

SPL De-Esser 9629 Manual

SPL De-Esser 9629 Manual

Safety Information

Do not use the SPL De-Esser 9629 in a wet or humid environment.
Do not expose the SPL De-Esser 9629 to extreme temperatures or direct sunlight.
Do not use the SPL De-Esser 9629 with any power supply other than the one supplied with the unit.
Do not attempt to service the SPL De-Esser 9629 yourself. If the unit malfunctions, please contact SPL Audio for assistance.

Before Use

Make sure that the SPL De-Esser 9629 is properly connected to your audio system.
Set the threshold control so that the de-esser only activates when sibilance is present.
Set the frequency control to the frequency range where sibilance is most prominent.
Set the reduction control to the desired amount of sibilance reduction.
Listen to the processed signal and adjust the controls as needed.

Troubleshooting

If the SPL De-Esser 9629 is not producing any output, check the connections to make sure that they are secure.
If the SPL De-Esser 9629 is producing distorted output, reduce the amount of reduction.
If the SPL De-Esser 9629 is removing too much or too little sibilance, adjust the threshold and frequency controls.

Maintenance

To clean the SPL De-Esser 9629, use a soft, dry cloth.
Do not use any harsh chemicals or solvents to clean the SPL De-Esser 9629.
Do not expose the SPL De-Esser 9629 to water or other liquids.

Warranty

The SPL De-Esser 9629 is covered by a one-year warranty. If the unit malfunctions within one year of purchase, SPL Audio will repair or replace it free of charge.

Contact Information

SPL Audio P.O. Box 12 27 D- 41368 Niederkrüchten Germany

Phone: +49-2163-98340 Fax: +49-2163-983420 Email: [email protected] Website: https://spl.audio/

Additional Information

The SPL De-Esser 9629 is a professional audio device that is designed to reduce sibilance in vocals and other audio signals.
The de-esser works by automatically detecting and reducing the level of high-frequency sounds that are characteristic of sibilance.
The SPL De-Esser 9629 is easy to use and can be adjusted to provide a natural-sounding reduction of sibilance.
The SPL De-Esser 9629 is a valuable tool for any audio engineer or producer who wants to improve the sound of their recordings.

Search This Blog

CircaMind